PartsTable
Technical Data Sheet
Download PDF

P1137 — P1137

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

P1137: P1137.

The P1137 is a the manufacturer industrial component. Key specifications include material: COPPER CORE CONDUCTOR ALL CONDUCTORS, temp_rating: -40.0 CELSIUS AND 75.0 CELSIUS DEGC, conductor_form: STRANDED ALL CONDUCTORS, overall_length: 3.594 INCHES NOMINAL IN, voltage_rating: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS, handle_clearance: 0.688 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-224-8554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ P1137
NSN: 5340-00-224-8554
NIINs: 002248554, 005426068
FSC: 5340 — Hardware, Commercial
CAGE: 73975 — HAMMACHER SCHLEMMER (USA)
SPECIFICATIONS
materialCOPPER CORE CONDUCTOR ALL CONDUCTORS
temp_rating-40.0 CELSIUS AND 75.0 CELSIUS DEGC
conductor_formSTRANDED ALL CONDUCTORS
overall_length3.594 INCHES NOMINAL IN
voltage_rating600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS
handle_clearance0.688 INCHES NOMINAL IN
surface_treatmentTIN CORE CONDUCTOR ALL CONDUCTORS
conductor_quantity3
round_conductor_size16 AWG ALL CONDUCTORS
mounting_facility_quantity2
cross-sectional_shape_styleROUND
strand_awg_size_per_conductor34 ALL CONDUCTORS
NSN5340-00-224-8554
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P1137 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 3.000 INCHES NOMINAL IN
•
HANDLE CLEARANCE: 0.688 INCHES NOMINAL IN
•
SURFACE TREATMENT: COPPER ALLOY OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.000 INCHES NOMINAL IN
OVERALL LENGTH3.594 INCHES NOMINAL IN
HANDLE CLEARANCE0.688 INCHES NOMINAL IN
SURFACE TREATMENTCOPPER ALLOY OVERALL
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
5W1137Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy P1137?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1137?
P1137 is a P1137. It is classified as a MRO (MRO_GENERAL).
What parts can replace P1137?
There is 1 known substitute for P1137: 5W1137. Substitute compatibility should be verified for your specific system.
What is the NSN for P1137?
P1137 is cataloged in the U.S. Government catalog under NSN 5340-00-224-8554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1137