PartsTable
Technical Data Sheet
Download PDF

P1132-(0.093)-F — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P1132-(0.093)-F: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, nut_diameter: 0.344 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-947-4348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P1132-(0.093)-F
NSN: 5310-00-947-4348
FSC: 5310 — Nuts and Washers
CAGE: 86577 — PRECISION METAL PRODUCTS CO (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
nut_diameter0.344 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
pilot_diameter0.311 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.344 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
NSN5310-00-947-4348
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P1132-(0.093)-F · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.344 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.344 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.311 INCHES NOMINAL IN
•
NUT HEIGHT: 0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.344 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.344 INCHES NOMINAL IN
PILOT DIAMETER0.311 INCHES NOMINAL IN
NUT HEIGHT0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLECLINCH
SUBSTITUTES & CROSS-REFERENCES 9
F-032-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
11687661Reference document
Same NSN cross-reference
Reference document — Secondary reference
SW21822Reference document
Same NSN cross-reference
Reference document — Secondary reference
0740645Reference document
Same NSN cross-reference
Reference document — Secondary reference
214722-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ES3685-05BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P1132-(0.093)-F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1132-(0.093)-F?
P1132-(0.093)-F is a NUT,PLAIN,CLINCH.
What parts can replace P1132-(0.093)-F?
There are 9 known substitutes for P1132-(0.093)-F: F-032-2, 11687661, SW21822 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P1132-(0.093)-F?
P1132-(0.093)-F is cataloged in the U.S. Government catalog under NSN 5310-00-947-4348. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1132-(0.093)-F

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.