PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P11157
P11157 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.9060 INCHES NOMINAL IN, bore_diameter: 3.0000 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0800 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3578, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P11157
NSN: 3110-00-100-3578
FSC: 3110
CAGE: 05417 — NORTHWEST SCREENPRINT CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.9060 INCHES NOMINAL IN
bore_diameter3.0000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0800 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3578
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: P11157 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.9060 INCHES NOMINAL IN
•
BORE DIAMETER: 3.0000 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0800 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.9060 INCHES NOMINAL IN
BORE DIAMETER3.0000 INCHES NOMINAL IN
CONE CORNER RADIUS0.0800 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
34300Interchangeable
interchangeable cross-reference
interchangeable
95014-3Interchangeable
interchangeable cross-reference
interchangeable
41928Interchangeable
interchangeable cross-reference
interchangeable
11956Interchangeable
interchangeable cross-reference
interchangeable
A11792Interchangeable
interchangeable cross-reference
interchangeable
BSUC0208ZAKAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P11157?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P11157?
P11157 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace P11157?
There are 20 known substitutes for P11157: 34300, 95014-3, 41928 and 17 more. Substitute compatibility should be verified for your specific system.
Is P11157 still available?
P11157 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P11157

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026