PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P11015
P11015 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The VALVE,UNLOADING is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN, housing_bore_diameter: 5.501 INCHES NOMINAL IN, sealing_element_style: ANGULAR, end_item_identification: MANIFOLD,6 VALVE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-9467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P11015
NSN: 5330-00-285-9467
FSC: 5330
CAGE: 45149 — OSGOOD CO THE (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
housing_bore_diameter5.501 INCHES NOMINAL IN
sealing_element_styleANGULAR
end_item_identificationMANIFOLD,6 VALVE
accommodated_shaft_diameter4.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-285-9467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P11015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 4.500 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 5.501 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER4.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
HOUSING BORE DIAMETER5.501 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
55200Interchangeable
interchangeable cross-reference
interchangeable
1A9859Interchangeable
interchangeable cross-reference
interchangeable
X1-63Interchangeable
interchangeable cross-reference
interchangeable
62AX310Interchangeable
interchangeable cross-reference
interchangeable
59007HInterchangeable
interchangeable cross-reference
interchangeable
7C7-130VInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P11015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P11015?
P11015 is a VALVE,UNLOADING.
What parts can replace P11015?
There are 24 known substitutes for P11015: 55200, 1A9859, X1-63 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P11015?
P11015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-9467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P11015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026