PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P10912
P10912 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, design_type: NONREUSABLE, head_height: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, thread_class: 2A A, body_diameter: 3.062 INCHES MINIMUM AND 3.094 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-301-8159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P10912
NSN: 5330-00-301-8159
FSC: 5330
CAGE: 18746 — PROVEN PUMPS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
design_typeNONREUSABLE
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
thread_class2A A
body_diameter3.062 INCHES MINIMUM AND 3.094 INCHES MAXIMUM IN
thread_length1.500 INCHES MINIMUM AND 1.725 INCHES MAXIMUM IN
flow_directionOUTSIDE IN
fastener_length6.000 INCHES NOMINAL IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
style_designatorCYLINDRICAL W/ CONTAINER (RIGID)
thread_directionRIGHT-HAND
NSN5330-00-301-8159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P10912 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: U
•
HARDNESS RATING: 72.0 SHORE DUROMETER A MINIMUM AND 77.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 0.688 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL SHAPE STYLEU
HARDNESS RATING72.0 SHORE DUROMETER A MINIMUM AND 77.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
PERIPHERAL DIAMETER0.688 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
LP165Interchangeable
interchangeable cross-reference
interchangeable
1S9150Interchangeable
interchangeable cross-reference
interchangeable
PF333Interchangeable
interchangeable cross-reference
interchangeable
FF-S-85Interchangeable
interchangeable cross-reference
interchangeable
MS90725-178Interchangeable
interchangeable cross-reference
interchangeable
NASM90725Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P10912?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P10912?
P10912 is a FILTER ELEMENT,FLUID.
What parts can replace P10912?
There are 6 known substitutes for P10912: LP165, 1S9150, PF333 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P10912?
P10912 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-301-8159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P10912

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026