PartsTable
Technical Data Sheet
PartsTable / O-RING / P10818
P10818 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 1.407 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN, cross-sectional_height: 0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-599-6576, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P10818
NSN: 5331-00-599-6576
FSC: 5331 — O-RING
CAGE: 556A6 — LINDE MATERIAL HANDLING NORTH AMERICA CORPORATION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter1.407 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN
cross-sectional_height0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
NSN5331-00-599-6576
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P10818 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 1.407 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER1.407 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
5940001434780Interchangeable
interchangeable cross-reference
interchangeable
YAE12NInterchangeable
interchangeable cross-reference
interchangeable
2551HXInterchangeable
interchangeable cross-reference
interchangeable
38067Interchangeable
interchangeable cross-reference
interchangeable
33-268295-2Interchangeable
interchangeable cross-reference
interchangeable
125-165Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P10818?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P10818?
P10818 is a O-RING.
What parts can replace P10818?
There are 16 known substitutes for P10818: 5940001434780, YAE12N, 2551HX and 13 more. Substitute compatibility should be verified for your specific system.
Is P10818 still available?
P10818 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P10818

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026