PartsTable
Technical Data Sheet
Download PDF

P10736 — FLANGE,PROPULSION SHAFT,SHIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P10736: FLANGE,PROPULSION SHAFT,SHIP.

The FLANGE,PROPULSION SHAFT,SHIP is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR AND CORK OVERALL, outside_diameter: 10.690 INCHES NOMINAL IN, special_features: USED ON MODEL MG5075SER MARINE GEAR; FLANGE SIZE GWB 587.42, style_designator: CIRCULAR, aperture_diameter: 10.190 INCHES NOMINAL IN, end_item_identification: BOAT. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-740-9306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P10736
NSN: 5330-00-740-9306
NIINs: 007409306, 015291198
FSC: 5330 — Packing and Gasket Materials
CAGE: 18265 — DONALDSON COMPANY, INC. (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR AND CORK OVERALL
outside_diameter10.690 INCHES NOMINAL IN
special_featuresUSED ON MODEL MG5075SER MARINE GEAR; FLANGE SIZE GWB 587.42
style_designatorCIRCULAR
aperture_diameter10.190 INCHES NOMINAL IN
end_item_identificationBOAT
cross-sectional_thickness0.060 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,+2255A MIL SPEC ALL MATERIAL RESPONSES OVERALL A
NSN5330-00-740-9306
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P10736 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.060 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+2255A MIL SPEC ALL MATERIAL RESPONSES OVERALL A
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 10.690 INCHES NOMINAL IN
•
APERTURE DIAMETER: 10.190 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR AND CORK OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.060 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+2255A MIL SPEC ALL MATERIAL RESPONSES OVERALL A
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER10.690 INCHES NOMINAL IN
APERTURE DIAMETER10.190 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR AND CORK OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
KC1194Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P10736?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P10736?
P10736 is a FLANGE,PROPULSION SHAFT,SHIP.
What parts can replace P10736?
There is 1 known substitute for P10736: KC1194. Substitute compatibility should be verified for your specific system.
What is the NSN for P10736?
P10736 is cataloged in the U.S. Government catalog under NSN 5330-00-740-9306. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P10736

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.