PartsTable
Technical Data Sheet
Download PDF

P1070 — STUD,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P1070: STUD,PLAIN.

The STUD,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140, thread_class: 3A NUT THREAD A, thread_length: 0.875 INCHES MINIMUM STUD THREAD IN, overall_length: 5.500 INCHES NOMINAL IN, first_leg_angle: 135.0 DEGREES NOMINAL, first_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-7386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P1070
NSN: 5340-00-598-7386
NIINs: 005987386, 006778889
FSC: 5340 — Hardware, Commercial
CAGE: 96195 — UNISTRUT INTERNATIONAL CORPORATION DBA UNISTRUT DIVERSIFIED PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 4140
thread_class3A NUT THREAD A
thread_length0.875 INCHES MINIMUM STUD THREAD IN
overall_length5.500 INCHES NOMINAL IN
first_leg_angle135.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width1.625 INCHES NOMINAL IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM
first_leg_length3.750 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.625 INCHES NOMINAL IN
style_designatorANGLE
NSN5340-00-598-7386
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P1070 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.812 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.812 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 135.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.625 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 3.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.812 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.812 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.562 INCHES NOMINAL IN
FIRST LEG ANGLE135.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG HOLE DIAMETER0.562 INCHES NOMINAL IN
SECOND LEG WIDTH1.625 INCHES NOMINAL IN
SECOND LEG LENGTH3.875 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.812 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P1070?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1070?
P1070 is a STUD,PLAIN.
What is the NSN for P1070?
P1070 is cataloged in the U.S. Government catalog under NSN 5340-00-598-7386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1070

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.