PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P10512
P10512 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.084 INCHES MINIMUM AND 0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM0.100 INCHES MAXIMUM IN, diameter: 0.243 INCHES MINIMUM AND 0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM0.248 INCHES MAXIMUM IN, head_style: FLATFLAT, style_designator: STRAIGHTSTRAIGHT, pin_head_diameter: 0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.380 INCHES MAXIMUM0.380 INCHES MAXIMUM IN, under_head_length: 0.900 INCHES MINIMUM AND 0.900 INCHES MINIMUM AND 0.916 INCHES MAXIMUM0.916 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-334-8656, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P10512
NSN: 5315-01-334-8656
FSC: 5315
CAGE: 05331 — LULL LIFT CORP DBA OMNIQUIP PARTS WORLDWIDE (USA)
SPECIFICATIONS
height0.084 INCHES MINIMUM AND 0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM0.100 INCHES MAXIMUM IN
diameter0.243 INCHES MINIMUM AND 0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM0.248 INCHES MAXIMUM IN
head_styleFLATFLAT
style_designatorSTRAIGHTSTRAIGHT
pin_head_diameter0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.380 INCHES MAXIMUM0.380 INCHES MAXIMUM IN
under_head_length0.900 INCHES MINIMUM AND 0.900 INCHES MINIMUM AND 0.916 INCHES MAXIMUM0.916 INCHES MAXIMUM IN
first_hole_diameter0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLEDONE END DRILLED
end_item_identificationNSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK)NSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK)
distance_from_centerline_of_hole_to_end_of_pin0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN
NSN5315-01-334-8656
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P10512 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLATFLAT
•
STYLE DESIGNATOR: STRAIGHTSTRAIGHT
•
HOLE ARRANGEMENT STYLE: ONE END DRILLEDONE END DRILLED
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN
•
HEIGHT: 0.084 INCHES MINIMUM AND 0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM0.100 INCHES MAXIMUM IN
•
FIRST HOLE DIAMETER: 0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.900 INCHES MINIMUM AND 0.900 INCHES MINIMUM AND 0.916 INCHES MAXIMUM0.916 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLATFLAT
STYLE DESIGNATORSTRAIGHTSTRAIGHT
HOLE ARRANGEMENT STYLEONE END DRILLEDONE END DRILLED
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN
HEIGHT0.084 INCHES MINIMUM AND 0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM0.100 INCHES MAXIMUM IN
FIRST HOLE DIAMETER0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN
UNDER HEAD LENGTH0.900 INCHES MINIMUM AND 0.900 INCHES MINIMUM AND 0.916 INCHES MAXIMUM0.916 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONNSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK)NSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK)
DIAMETER0.243 INCHES MINIMUM AND 0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM0.248 INCHES MAXIMUM IN
PIN HEAD DIAMETER0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.380 INCHES MAXIMUM0.380 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
11035Interchangeable
interchangeable cross-reference
interchangeable
R35Interchangeable
interchangeable cross-reference
interchangeable
ARC11035Interchangeable
interchangeable cross-reference
interchangeable
5360PL0673807Interchangeable
interchangeable cross-reference
interchangeable
C54149Interchangeable
interchangeable cross-reference
interchangeable
54149Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P10512?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P10512?
P10512 is a PIN,STRAIGHT,HEADED.
What parts can replace P10512?
There are 15 known substitutes for P10512: 11035, R35, ARC11035 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P10512?
P10512 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-334-8656. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P10512

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026