PartsTable
Technical Data Sheet
Download PDF

P100017 — FAN,TUBEAXIAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P100017: FAN,TUBEAXIAL.

The FAN,TUBEAXIAL is a the manufacturer thermal management component critical for maintaining optimal operating temperatures in enterprise hardware. Key specifications include phase: SINGLE, width: 4.690 INCHES NOMINAL IN, height: 4.690 INCHES NOMINAL IN, length: 1.540 INCHES NOMINAL IN, material: ZINC ALLOY HOUSING, drive_type: DIRECT. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-482-4630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P100017
NSN: 5331-00-482-4630
NIINs: 004824630, 011700680
FSC: 5331 — O-ring
CAGE: 97902 — VERSA PRODUCTS CO INC (USA)
SPECIFICATIONS
phaseSINGLE
width4.690 INCHES NOMINAL IN
height4.690 INCHES NOMINAL IN
length1.540 INCHES NOMINAL IN
materialZINC ALLOY HOUSING
drive_typeDIRECT
air_flow_rate70.0 CUBIC FEET PER MINUTE NOMINAL
flow_directionOUTWARD
inclosure_typeFULLY INCLOSED
prime_mover_typeELECTRIC MOTOR
style_designatorFIXED
speed_adjustmentsSINGLE SPEED
NSN5331-00-482-4630
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P100017 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.853 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TYPICAL APPLICATIONS
  • Server thermal management and cooling
  • Hot-swap fan replacement in production environments
  • Redundant cooling for high-availability systems
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.853 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
ARP568-212MILR2 5987Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P100017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P100017?
P100017 is a FAN,TUBEAXIAL.
What parts can replace P100017?
There is 1 known substitute for P100017: ARP568-212MILR2 5987. Substitute compatibility should be verified for your specific system.
What is the NSN for P100017?
P100017 is cataloged in the U.S. Government catalog under NSN 5331-00-482-4630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P100017

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.