PartsTable
Technical Data Sheet
Download PDF

P10-7-40 — PLATE,SPRAYER,OIL BURNER ATOMIZE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P10-7-40: PLATE,SPRAYER,OIL BURNER ATOMIZE.

PLATE,SPRAYER,OIL BURNER ATOMIZE. Key specifications include material: STEEL CORROSION RESISTING, thickness: 0.032 INCHES NOMINAL IN, hole_diameter: 0.169 INCHES NOMINAL IN, overall_length: 0.342 INCHES NOMINAL IN, overall_diameter: 0.998 INCHES NOMINAL IN, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-428-1414, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P10-7-40
NSN: 5310-00-428-1414
NIINs: 004281414, 004354499
FSC: 5310 — Nuts and Washers
CAGE: 79172 — SIEMENS WATER TECHNOLOGIES CORP. DIV WALLACE & TIERNAN PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
thickness0.032 INCHES NOMINAL IN
hole_diameter0.169 INCHES NOMINAL IN
overall_length0.342 INCHES NOMINAL IN
overall_diameter0.998 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-00-428-1414
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P10-7-40 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.690 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.169 INCHES NOMINAL IN
•
THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.690 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
MATERIALCOPPER ALLOY OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.169 INCHES NOMINAL IN
THICKNESS0.032 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P10-7-40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P10-7-40?
P10-7-40 is a PLATE,SPRAYER,OIL BURNER ATOMIZE.
What is the NSN for P10-7-40?
P10-7-40 is cataloged in the U.S. Government catalog under NSN 5310-00-428-1414. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P10-7-40

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.