PartsTable
Technical Data Sheet
PartsTable / MRO / P1-5
P1-5 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,NONIND. Key specifications include width: 0.375 INCHES NOMINAL IN, length: 1.500 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, end_style: SPRING END,SQUARED BOTH ENDS, shank_type: THREADED, body_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-122-0621, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ P1-5
NSN: 5340-00-122-0621
FSC: 5340
CAGE: 95745 — STAR HYDRAULICS LLC (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
length1.500 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
end_styleSPRING END,SQUARED BOTH ENDS
shank_typeTHREADED
body_length0.875 INCHES NOMINAL IN
design_formCURVED LEFT
design_typeNONREUSABLE
head_length0.375 INCHES NOMINAL IN
inscriptionFOR THE EYE
flange_shapeROUND ALL ENDS
usage_designSPACE HEATER
NSN5340-00-122-0621
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P1-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTEEL; CADMIUM PLATED; W/PLASTIC HAND GRIP; 1.175 IN. OD BY 4.625 IN. O/A DIA OF GRIP; LEVER DIM; 0.890 IN. OD; 0.660 IN. ID; 24.000 IN. O/A LG; LEVER HOLLOW THRU IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
P15Interchangeable
interchangeable cross-reference
interchangeable
607-2INInterchangeable
interchangeable cross-reference
interchangeable
6250Interchangeable
interchangeable cross-reference
interchangeable
1551AS275-2Interchangeable
interchangeable cross-reference
interchangeable
10X10X2Interchangeable
interchangeable cross-reference
interchangeable
2063K64Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P1-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1-5?
P1-5 is a RESISTOR,FIXED,WIRE WOUND,NONIND. It is classified as a MRO (MRO_GENERAL).
What parts can replace P1-5?
There are 15 known substitutes for P1-5: P15, 607-2IN, 6250 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P1-5?
P1-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-122-0621. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026