PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P1-3
P1-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include width: 0.375 INCHES NOMINAL IN, length: 1.500 INCHES NOMINAL IN, diameter: 0.125 INCHES NOMINAL IN, material: STEEL OVERALL, bore_shape: STRAIGHT, shaft_type: ROUND, FLATTED SINGLE ACTUATOR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5068, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P1-3
NSN: 3110-00-156-5068
FSC: 3110
CAGE: 13125 — CLEVELAND TRENCHER CO INC (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
length1.500 INCHES NOMINAL IN
diameter0.125 INCHES NOMINAL IN
materialSTEEL OVERALL
bore_shapeSTRAIGHT
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.188 INCHES NOMINAL SINGLE ACTUATOR IN
inscriptionFOR THE EAR
constructionSEAMLESS
shaft_length0.438 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
bore_diameter30.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-5068
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: P1-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 72.00 MILLIMETERS NOMINAL MM
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER72.00 MILLIMETERS NOMINAL MM
SELF-ALIGNMENT LOCATIONINTERNAL
CONTACT ANGLE25.0 DEGREES MAXIMUM
LUBRICATION MATERIALGREASE
SELF-ALIGNMENT LOCATIONINTERNAL
CONTACT ANGLE25.0 DEGREES MAXIMUM
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
ALIGNMENT TYPESELF-ALIGNING
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
F15288Interchangeable
interchangeable cross-reference
interchangeable
151BREPEATINGC01LInterchangeable
interchangeable cross-reference
interchangeable
151BInterchangeable
interchangeable cross-reference
interchangeable
B300968AInterchangeable
interchangeable cross-reference
interchangeable
3465T22Interchangeable
interchangeable cross-reference
interchangeable
6300968Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P1-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1-3?
P1-3 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace P1-3?
There are 28 known substitutes for P1-3: F15288, 151BREPEATINGC01L, 151B and 25 more. Substitute compatibility should be verified for your specific system.
Is P1-3 still available?
P1-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026