PartsTable
Technical Data Sheet
Download PDF

P01653 — HOSE,NONMETALLIC

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P01653: HOSE,NONMETALLIC.

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM TUBE, nut_style: HEXAGON, nut_height: 0.243 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-335-7085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P01653
NSN: 5310-01-335-7085
NIINs: 013357085, 014473800
FSC: 5310 — Nuts and Washers
CAGE: 1YHH8 — JLG INDUSTRIES, INC. (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM TUBE
nut_styleHEXAGON
nut_height0.243 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
vacuum_in_torr50.0
inside_diameter0.250 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
outside_diameter0.490 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
NSN5310-01-335-7085
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P01653 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.345 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 800.0 FAHRENHEIT MAXIMUM DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.243 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.345 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING800.0 FAHRENHEIT MAXIMUM DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.243 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 1
94820A009Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P01653?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P01653?
P01653 is a HOSE,NONMETALLIC.
What parts can replace P01653?
There is 1 known substitute for P01653: 94820A009. Substitute compatibility should be verified for your specific system.
What is the NSN for P01653?
P01653 is cataloged in the U.S. Government catalog under NSN 5310-01-335-7085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P01653

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.