PartsTable
Technical Data Sheet
Download PDF

P012197154 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

P012197154: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.670 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN, thread_length: 0.429 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-219-7154, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P012197154
NSN: 5305-01-219-7154
FSC: 5305 — Screws
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.670 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
thread_length0.429 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
locking_featureSTRIP OR PATCH OR PELLET THREADS
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
special_test_featuresSPECIAL QUALITY CONTROL TESTING
NSN5305-01-219-7154
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: P012197154 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
THREAD LENGTH: 0.429 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
THREAD LENGTH0.429 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATURESTRIP OR PATCH OR PELLET THREADS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
115387-24693-C140Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LL-HX4-3620Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P012197154?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P012197154?
P012197154 is a SCREW,CAP,SOCKET HEAD.
What parts can replace P012197154?
There are 2 known substitutes for P012197154: 115387-24693-C140, LL-HX4-3620. Substitute compatibility should be verified for your specific system.
What is the NSN for P012197154?
P012197154 is cataloged in the U.S. Government catalog under NSN 5305-01-219-7154. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P012197154

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.