PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P007191
P007191 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.250 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.875 INCHES NOMINAL IN, special_features: BRKT SPOTWELDED TO BAND,90.0 DEG FROM TONGUE,5.125 IN. LG,TWO 0.406 IN.

DIA HOLES LOCATED 3.750 IN. APART IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-617-7909, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P007191
NSN: 5340-00-617-7909
FSC: 5340
CAGE: 18265 — DONALDSON COMPANY, INC. (USA)
SPECIFICATIONS
diameter0.250 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.875 INCHES NOMINAL IN
special_featuresBRKT SPOTWELDED TO BAND,90.0 DEG FROM TONGUE,5.125 IN. LG,TWO 0.406 IN. DIA HOLES LOCATED 3.750 IN. APART IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter6.500 INCHES NOMINAL IN
end_item_identification2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
integral_nut_type_and_quantity1 PLAIN EQUAL LENGTH TONGUES
distance_from_loop_center_to_tongue_end3.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole3.500 INCHES NOMINAL IN
NSN5340-00-617-7909
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P007191 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 3.750 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 6.500 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 1 PLAIN EQUAL LENGTH TONGUES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 3.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END3.750 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER6.500 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY1 PLAIN EQUAL LENGTH TONGUES
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE3.500 INCHES NOMINAL IN
OVERALL WIDTH0.875 INCHES NOMINAL IN
SPECIAL FEATURESBRKT SPOTWELDED TO BAND,90.0 DEG FROM TONGUE,5.125 IN. LG,TWO 0.406 IN. DIA HOLES LOCATED 3.750 IN. APART IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
P00-7191Upgraded Successor
successor cross-reference
successor
531715Upgraded Successor
successor cross-reference
successor
106849Interchangeable
interchangeable cross-reference
interchangeable
DLGN3034Interchangeable
interchangeable cross-reference
interchangeable
19-674-733PGInterchangeable
interchangeable cross-reference
interchangeable
1581E4PCTPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P007191?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P007191?
P007191 is a CLAMP,LOOP.
What parts can replace P007191?
There are 12 known substitutes for P007191: P00-7191, 531715, 106849 and 9 more. Substitute compatibility should be verified for your specific system.
Is P007191 still available?
P007191 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P007191

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026