PartsTable
Technical Data Sheet
P-510 ✓ Verified by PartsTable
Motorola · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>The Motorola Car Cell Phone Charger P510 gives you power to spare exactly where you need it most... on the road.</b><br><br>The Motorola P510 Car Cell Phone Charger is small and lightweight, but packs the power you need to charge your cell phone in the car and on the go. The P510 Car Charger delivers power to your phone while at the same time charging your phone's battery.

The P510 Car Charger plugs into most in-vehicle power sockets, such as your cigarette lighter adapter, and features an extendable coil cord. The unit will charge an original Motorola battery up to 90% capacity in two to three hours. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-422-2779, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
P-510
NSN: 5315-00-422-2779
FSC: 5315
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
blade_typeRECIPROCATING
blade_length68.5 MILLIMETERS NOMINAL MM
jaw_capacity1.375 INCHES MAXIMUM IN
overall_length10.000 INCHES NOMINAL IN
first_end_styleCHAMFERED
special_featuresSTERILE;TEETH FINE;STROKES PER MINUTE 4,800;USED W/MAXI-DRIVER 2 POWER INSTRUMENT;70 TEETH PER CM;ORTHOPEDIC
features_providedDISPOSABLE
surface_treatmentNICKEL OVERALL
pin_overall_length0.437 INCHES NOMINAL IN
pin_overall_diameter0.0920 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-00-422-2779
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P-510 · Motorola ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-26074,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH: 0.437 INCHES NOMINAL IN
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
PIN OVERALL DIAMETER: 0.0920 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM IN
FIRST END STYLE: CHAMFERED
SURFACE TREATMENT: NICKEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-26074,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH0.437 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.0920 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
SURFACE TREATMENTNICKEL OVERALL
FIRST END TAPER LENGTH0.020 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MIL-P-19290 TY5Interchangeable
interchangeable cross-reference
interchangeable
B107.500Interchangeable
interchangeable cross-reference
interchangeable
B107.23 TY1CL1STAInterchangeable
interchangeable cross-reference
interchangeable
526344Interchangeable
interchangeable cross-reference
interchangeable
P5101Interchangeable
interchangeable cross-reference
interchangeable
P510Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P-510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P-510?
P-510 is a PRINTER,AUTOMATIC DATA PROCESSIN manufactured by Motorola.
What parts can replace P-510?
There are 10 known substitutes for P-510: MIL-P-19290 TY5, B107.500, B107.23 TY1CL1STA and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P-510?
P-510 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-422-2779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P-510