PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P-235-4
P-235-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, case_style: SQUARE, nut_height: 0.641 INCHES NOMINAL IN, seal_width: 0.594 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1652, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P-235-4
NSN: 5330-00-291-1652
FSC: 5330
CAGE: 8E499 — KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
case_styleSQUARE
nut_height0.641 INCHES NOMINAL IN
seal_width0.594 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats1.125 INCHES NOMINAL IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeCHAMFERED
housing_bore_diameter3.876 INCHES NOMINAL IN
NSN5330-00-291-1652
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P-235-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.594 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT A
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 2.750 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.876 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.594 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT A
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.750 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT B
HOUSING BORE DIAMETER3.876 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
200447Interchangeable
interchangeable cross-reference
interchangeable
200447NInterchangeable
interchangeable cross-reference
interchangeable
1576503Interchangeable
interchangeable cross-reference
interchangeable
314160-2Interchangeable
interchangeable cross-reference
interchangeable
10-3212-4Interchangeable
interchangeable cross-reference
interchangeable
10-3212-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P-235-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P-235-4?
P-235-4 is a NUT,PLAIN,HEXAGON.
What parts can replace P-235-4?
There are 17 known substitutes for P-235-4: 200447, 200447N, 1576503 and 14 more. Substitute compatibility should be verified for your specific system.
Is P-235-4 still available?
P-235-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P-235-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026