PartsTable
Technical Data Sheet
PartsTable / MRO / P-10F
P-10F ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING FLOW CONTROL DEVICE, thickness: 0.126 INCHES NOMINAL IN, body_length: 1.750 INCHES NOMINAL IN, bonnet_type: INSIDE SCREW, hole_diameter: 0.420 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-051-9666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ P-10F
NSN: 5310-00-051-9666
FSC: 5310
CAGE: 58553 — SUPERIOR VALVE CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING FLOW CONTROL DEVICE
thickness0.126 INCHES NOMINAL IN
body_length1.750 INCHES NOMINAL IN
bonnet_typeINSIDE SCREW
hole_diameter0.420 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
connection_typeTHREADED INTERNAL PIPE ALL ENDS
terminal_length0.625 INCHES NOMINAL IN
connection_stylePLAIN,OPTIONAL END(PIPE) ALL ENDS
overall_diameter0.712 INCHES NOMINAL IN
style_designatorSTRAIGHT THRU
NSN5310-00-051-9666
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P-10F · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OVERALL DIAMETER: 0.712 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.420 INCHES NOMINAL IN
•
THICKNESS: 0.126 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OVERALL DIAMETER0.712 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.420 INCHES NOMINAL IN
THICKNESS0.126 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
P10FInterchangeable
interchangeable cross-reference
interchangeable
15-572Interchangeable
interchangeable cross-reference
interchangeable
A10FInterchangeable
interchangeable cross-reference
interchangeable
PF10F1-4Interchangeable
interchangeable cross-reference
interchangeable
N3511Interchangeable
interchangeable cross-reference
interchangeable
P10F0-1-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P-10F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P-10F?
P-10F is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace P-10F?
There are 8 known substitutes for P-10F: P10F, 15-572, A10F and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P-10F?
P-10F is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-051-9666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P-10F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026