PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P-10-7-231
P-10-7-231 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include length: 0.170 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, design_type: CONCAVE DISK, orifice_diameter: 0.081 INCHES NOMINAL IN, outside_diameter: 0.997 INCHES NOMINAL IN, thread_provision: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-876-9193, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P-10-7-231
NSN: 4730-00-876-9193
FSC: 4730
CAGE: 31923 — TODD COMBUSTION INC (USA)
SPECIFICATIONS
length0.170 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
design_typeCONCAVE DISK
orifice_diameter0.081 INCHES NOMINAL IN
outside_diameter0.997 INCHES NOMINAL IN
thread_provisionUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
NSN4730-00-876-9193
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: P-10-7-231 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.170 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.997 INCHES NOMINAL IN
•
DESIGN TYPE: CONCAVE DISK
•
ORIFICE DIAMETER: 0.081 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
•
THREAD PROVISION: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.170 INCHES NOMINAL IN
OUTSIDE DIAMETER0.997 INCHES NOMINAL IN
DESIGN TYPECONCAVE DISK
ORIFICE DIAMETER0.081 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING
THREAD PROVISIONUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
22661Interchangeable
interchangeable cross-reference
interchangeable
60908-1Interchangeable
interchangeable cross-reference
interchangeable
3201387Interchangeable
interchangeable cross-reference
interchangeable
P10-7-232Interchangeable
interchangeable cross-reference
interchangeable
P10-7-239Interchangeable
interchangeable cross-reference
interchangeable
J-22661Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P-10-7-231?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P-10-7-231?
P-10-7-231 is a RESTRICTOR,FLUID FLOW.
What parts can replace P-10-7-231?
There are 8 known substitutes for P-10-7-231: 22661, 60908-1, 3201387 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P-10-7-231?
P-10-7-231 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-876-9193. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P-10-7-231

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026