PartsTable
Technical Data Sheet
Download PDF

P-1-6-5 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

P-1-6-5: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, taper_angle: 60.00 DEGREES NOMINAL, overall_width: 0.0342 INCHES NOMINAL IN, connection_type: EXTERNAL QUICK DISCONNECT FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN, connection_style: PUSH (EXTERNAL) FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-807-4499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P-1-6-5
NSN: 3110-00-807-4499
NIINs: 008074499, 011982822
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 59750 — RMB MINIATURE BEARINGS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
taper_angle60.00 DEGREES NOMINAL
overall_width0.0342 INCHES NOMINAL IN
connection_typeEXTERNAL QUICK DISCONNECT FIRST END
inside_diameter0.375 INCHES NOMINAL IN
connection_stylePUSH (EXTERNAL) FIRST END
outside_diameter0.875 INCHES NOMINAL IN
operating_pressure10000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure20000.0 POUNDS PER SQUARE INCH LBS
end_connection_designSTRAIGHT FIRST END
inside_surface_conditionSMOOTH
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
NSN3110-00-807-4499
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: P-1-6-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.0650 INCHES MINIMUM AND 0.0666 INCHES MAXIMUM IN
•
SMALLEST FLANGE PIVOT DIAMETER: 0.0150 INCHES NOMINAL IN
•
TAPER ANGLE: 60.00 DEGREES NOMINAL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL WIDTH0.0342 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.0650 INCHES MINIMUM AND 0.0666 INCHES MAXIMUM IN
SMALLEST FLANGE PIVOT DIAMETER0.0150 INCHES NOMINAL IN
TAPER ANGLE60.00 DEGREES NOMINAL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
1604744-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P-1-6-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P-1-6-5?
P-1-6-5 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace P-1-6-5?
There is 1 known substitute for P-1-6-5: 1604744-2. Substitute compatibility should be verified for your specific system.
What is the NSN for P-1-6-5?
P-1-6-5 is cataloged in the U.S. Government catalog under NSN 3110-00-807-4499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P-1-6-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.