PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ORC-12-430
ORC-12-430 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1011 OVERALL, end_radius: 0.220 INCHES MAXIMUM IN, fork_depth: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, thread_class: 2B ROD CONNECTION, overall_width: 0.500 INCHES MAXIMUM IN, thread_length: 0.482 INCHES MINIMUM AND 0.520 INCHES MAXIMUM ROD CONNECTION IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-117-3717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ORC-12-430
NSN: 5340-01-117-3717
FSC: 5340
CAGE: KC050 — HOLYHEAD MARINE SERVICES LTD (GBR)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1011 OVERALL
end_radius0.220 INCHES MAXIMUM IN
fork_depth0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
thread_class2B ROD CONNECTION
overall_width0.500 INCHES MAXIMUM IN
thread_length0.482 INCHES MINIMUM AND 0.520 INCHES MAXIMUM ROD CONNECTION IN
fork_span_width0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
special_featuresSTEEL PIN INCLUDED
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentCADMIUM OVERALL
fork_arm_thickness0.151 INCHES NOMINAL IN
NSN5340-01-117-3717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ORC-12-430 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF ROD CONNECTION
•
FORK SPAN WIDTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.151 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OVERALL
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 1.540 INCHES MINIMUM AND 1.580 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF ROD CONNECTION
FORK SPAN WIDTH0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
FORK ARM THICKNESS0.151 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END1.540 INCHES MINIMUM AND 1.580 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NOMINAL THREAD SIZE0.190 INCHES ROD CONNECTION IN
SPECIAL FEATURESSTEEL PIN INCLUDED
THREAD CLASS2B ROD CONNECTION
END RADIUS0.220 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
0360180Upgraded Successor
successor cross-reference
successor
MILC36699Upgraded Successor
successor cross-reference
successor
31800Upgraded Successor
successor cross-reference
successor
6515NCM020353Upgraded Successor
successor cross-reference
successor
02-0676Upgraded Successor
successor cross-reference
successor
309752Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ORC-12-430?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ORC-12-430?
ORC-12-430 is a CLEVIS,ROD END.
What parts can replace ORC-12-430?
There are 9 known substitutes for ORC-12-430: 0360180, MILC36699, 31800 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ORC-12-430?
ORC-12-430 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-117-3717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ORC-12-430

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026