PartsTable
Technical Data Sheet
Download PDF

OC001 — PANEL,INDICATOR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

OC001: PANEL,INDICATOR.

The PANEL,INDICATOR is a the manufacturer industrial component. Key specifications include width: 1.250 INCHES NOMINAL IN, length: 1.620 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHIONING, thickness: 1.500 INCHES NOMINAL IN, special_features: ITEM PREVIOUSLY KNOWN AS INDICATOR CONTROL PANEL, end_item_identification: 0C001 (34246), LINKSIM INDICATOR CONTROL PANEL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-340-0445, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ OC001
NSN: 5340-01-340-0445
NIINs: 013400445, 015449671
FSC: 5340 — Hardware, Commercial
CAGE: 70485 — ATLANTIC INDIA RUBBER CO INC (USA)
SPECIFICATIONS
width1.250 INCHES NOMINAL IN
length1.620 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHIONING
thickness1.500 INCHES NOMINAL IN
special_featuresITEM PREVIOUSLY KNOWN AS INDICATOR CONTROL PANEL
end_item_identification0C001 (34246), LINKSIM INDICATOR CONTROL PANEL
NSN5340-01-340-0445
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: OC001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.620 INCHES NOMINAL IN
•
WIDTH: 1.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHIONING
•
THICKNESS: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH1.620 INCHES NOMINAL IN
WIDTH1.250 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHIONING
THICKNESS1.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
6227661Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy OC001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is OC001?
OC001 is a PANEL,INDICATOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace OC001?
There is 1 known substitute for OC001: 6227661. Substitute compatibility should be verified for your specific system.
What is the NSN for OC001?
OC001 is cataloged in the U.S. Government catalog under NSN 5340-01-340-0445. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — OC001