OB100-T06-12D — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

OB100-T06-12D: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4027 OR STEEL COMP 4037 SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.928 INCHES MINIMUM AND 1.076 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.214 INCHES NOMINAL IN, shear_strength: 112000 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-399-5255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

OB100-T06-12D

NSN: 5320-01-399-5255
FSC: 5320 — Rivets
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 4027 OR STEEL COMP 4037 SLEEVE
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.928 INCHES MINIMUM AND 1.076 INCHES MAXIMUM IN
shank_style	SELF-PLUGGING MECHANICALLY LOCKED STEM
shank_diameter	0.214 INCHES NOMINAL IN
shear_strength	112000 SINGLE POUNDS PER SQUARE INCH
expansion_device	SERRATED STEM-TYPE W
special_features	BLIND,BOLT
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatment	ALUMINUM STEM
head_major_diameter	0.386 INCHES NOMINAL IN
end_item_identification	B-1B
NSN	5320-01-399-5255

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.214 INCHES NOMINAL IN

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE STEM

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.928 INCHES MINIMUM AND 1.076 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.214 INCHES NOMINAL IN
EXPANSION DEVICE	SERRATED STEM-TYPE W
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS2301 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.928 INCHES MINIMUM AND 1.076 INCHES MAXIMUM IN
SHANK STYLE	SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES	BLIND,BOLT

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

0B100-T06-12DSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy OB100-T06-12D?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is OB100-T06-12D?

OB100-T06-12D is a RIVET,BLIND.

What parts can replace OB100-T06-12D?

There is 1 known substitute for OB100-T06-12D: 0B100-T06-12D. Substitute compatibility should be verified for your specific system.

What is the NSN for OB100-T06-12D?

OB100-T06-12D is cataloged in the U.S. Government catalog under NSN 5320-01-399-5255. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

OB100-T06-12D — RIVET,BLIND

Request a Quote — OB100-T06-12D