PartsTable
Technical Data Sheet
PartsTable / O-RING / NY25-030

NY25-030 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The INSULATOR,BUSHING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, shank_height: 0.030 INCHES NOMINAL IN, overall_height: 0.093 INCHES NOMINAL IN, inside_diameter: 0.255 INCHES NOMINAL IN, outside_diameter: 0.510 INCHES NOMINAL IN, style_designator: SHOULDER. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-585-6632, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NY25-030
NSN: 5331-00-585-6632
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
shank_height0.030 INCHES NOMINAL IN
overall_height0.093 INCHES NOMINAL IN
inside_diameter0.255 INCHES NOMINAL IN
outside_diameter0.510 INCHES NOMINAL IN
style_designatorSHOULDER
center_hole_diameter2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
shank_outside_diameter0.312 INCHES NOMINAL IN
NSN5331-00-585-6632
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NY25-030 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
GGG-F-325 TY7STCInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
12568InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A-A-2311 TY3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
993306-55InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
NY25-30NInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5031-5InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NY25-030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NY25-030?
NY25-030 is a INSULATOR,BUSHING.
What parts can replace NY25-030?
There are 18 known substitutes for NY25-030: GGG-F-325 TY7STC, 12568, A-A-2311 TY3 and 15 more. Substitute compatibility should be verified for your specific system.
Is NY25-030 still available?
NY25-030 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NY25-030

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026