NX8 — CLAMP,LOOP
✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW
NX8: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.156 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-202-0159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NX8
NSN: 5340-00-202-0159 FSC: 5340 — Hardware, CommercialCAGE: K0720 — HELLERMANNTYTON LIMITED DBA STAENG (GBR)
SPECIFICATIONS
diameter 0.156 INCHES NOMINAL IN material PLASTIC POLYAMIDE NYLON BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.040 INCHES NOMINAL IN loop_inside_diameter 0.625 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.875 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.625 INCHES NOMINAL IN NSN 5340-00-202-0159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: NX8
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: SINGLE LOOP
• DIAMETER: 0.156 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.875 INCHES NOMINAL IN
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.625 INCHES NOMINAL IN
• MATERIAL: PLASTIC POLYAMIDE NYLON BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR SINGLE LOOP DIAMETER 0.156 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN MATERIAL THICKNESS 0.040 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.875 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.625 INCHES NOMINAL IN MATERIAL PLASTIC POLYAMIDE NYLON BAND LOOP INSIDE DIAMETER 0.625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
SUBSTITUTES & CROSS-REFERENCES
No substitute or cross-reference records for this part.
LIFECYCLE
NSN status Active · U.S. Government catalog
No demilitarization required
Ready to buy NX8?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NX8?
NX8 is a CLAMP,LOOP.
What is the NSN for NX8?
NX8 is cataloged in the U.S. Government catalog under NSN 5340-00-202-0159. This indicates validated use in U.S. government and defense supply chains.