NX5 — COUPLER,ANTENNA
✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW
NX5: COUPLER,ANTENNA.
The COUPLER,ANTENNA is a the manufacturer industrial component. Key specifications include diameter: 0.156 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: ITEM HAS A 0.6 METER INTERCONNECT CABLE, PRE-TUNED AT 518KHZ KHz, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-178-8112, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NX5
NSN: 5340-00-178-8112 NIINs: 001788112 , 002182531 , 012493790 , 015577050 FSC: 5340 — Hardware, CommercialCAGE: 0WYH2 — ELECTROVERT USA CORP (USA)
SPECIFICATIONS
diameter 0.156 INCHES NOMINAL IN material PLASTIC POLYAMIDE NYLON OVERALL overall_width 0.375 INCHES NOMINAL IN special_features ITEM HAS A 0.6 METER INTERCONNECT CABLE, PRE-TUNED AT 518KHZ KHz style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.046 INCHES NOMINAL IN loop_inside_diameter 0.437 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.447 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.468 INCHES NOMINAL IN NSN 5340-00-178-8112
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: NX5
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: SINGLE LOOP
• DIAMETER: 0.128 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.447 INCHES NOMINAL IN
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.275 INCHES NOMINAL IN
• MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR SINGLE LOOP DIAMETER 0.128 INCHES NOMINAL IN OVERALL WIDTH 0.281 INCHES NOMINAL IN MATERIAL THICKNESS 0.032 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.447 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.275 INCHES NOMINAL IN MATERIAL PLASTIC OVERALL LOOP INSIDE DIAMETER 0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
900865-022 Same NSN cross-reference Same NSN cross-reference
Also cataloged under this NSN
PH-23801-8 Reference document Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
900024-8 Reference document Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN status Active · U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demand No demilitarization required
Ready to buy NX5?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NX5?
NX5 is a COUPLER,ANTENNA.
What parts can replace NX5?
There are 3 known substitutes for NX5: 900865-022, PH-23801-8, 900024-8. Substitute compatibility should be verified for your specific system.
What is the NSN for NX5?
NX5 is cataloged in the U.S. Government catalog under NSN 5340-00-178-8112. This indicates validated use in U.S. government and defense supply chains.