NWHM10 — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

NWHM10: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL ROD END BODY, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.6245 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN, overall_length: 3.3750 INCHES NOMINAL IN, thread_diameter: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-661-7583, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NWHM10

NSN: 3120-00-661-7583
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)

SPECIFICATIONS

material	STEEL ROD END BODY
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.6245 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
overall_length	3.3750 INCHES NOMINAL IN
thread_diameter	0.625 INCHES NOMINAL IN
style_designator	BALL TYPE
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM OVERALL
inner_member_width	0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
outer_member_width	0.5670 INCHES MAXIMUM IN
shank_thread_length	1.6250 INCHES NOMINAL IN
NSN	3120-00-661-7583

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 1.6250 INCHES NOMINAL IN

•

BORE CENTER TO SHANK END DISTANCE: 2.6250 INCHES NOMINAL IN

•

INNER MEMBER WIDTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN

•

OUTER MEMBER WIDTH: 0.5670 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: BALL TYPE

•

THREAD DIAMETER: 0.625 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	1.6250 INCHES NOMINAL IN
BORE CENTER TO SHANK END DISTANCE	2.6250 INCHES NOMINAL IN
INNER MEMBER WIDTH	0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
OUTER MEMBER WIDTH	0.5670 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER
OVERALL LENGTH	3.3750 INCHES NOMINAL IN
THREAD DIRECTION	RIGHT-HAND
SHANK STYLE	EXTERNALLY THREADED

SUBSTITUTES & CROSS-REFERENCES 4

482785-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

HMF10Reference document

Same NSN cross-reference

Reference document — Secondary reference

NWHMF10Reference document

Same NSN cross-reference

Reference document — Secondary reference

HM10Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy NWHM10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NWHM10?

NWHM10 is a BEARING,PLAIN,ROD END.

What parts can replace NWHM10?

There are 4 known substitutes for NWHM10: 482785-2, HMF10, NWHMF10 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for NWHM10?

NWHM10 is cataloged in the U.S. Government catalog under NSN 3120-00-661-7583. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NWHM10 — BEARING,PLAIN,ROD END

Request a Quote — NWHM10