PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NW14711
NW14711 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 1.000 INCHES NOMINAL IN, style_designator: STRAIGHT ARCH, material_thickness: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-247-0498, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NW14711
NSN: 5340-00-247-0498
FSC: 5340
CAGE: 44185 — TLD WOLLARD LLC (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width1.000 INCHES NOMINAL IN
style_designatorSTRAIGHT ARCH
material_thickness0.125 INCHES NOMINAL IN
mounting_hole_size0.344 INCHES NOMINAL IN
inside_diameter/arch_length9.375 INCHES NOMINAL IN
distance_between_mounting_hole_centers10.625 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch12.875 INCHES NOMINAL IN
NSN5340-00-247-0498
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NW14711 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 12.875 INCHES NOMINAL IN
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: STRAIGHT ARCH
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 10.625 INCHES NOMINAL IN
•
MOUNTING HOLE SIZE: 0.344 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
CUSHION: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE BETWEEN BASE AND INSIDE OF ARCH12.875 INCHES NOMINAL IN
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORSTRAIGHT ARCH
DISTANCE BETWEEN MOUNTING HOLE CENTERS10.625 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.344 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
INSIDE DIAMETER/ARCH LENGTH9.375 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
14711Interchangeable
interchangeable cross-reference
interchangeable
499737C1Interchangeable
interchangeable cross-reference
interchangeable
Y028 787 03Interchangeable
interchangeable cross-reference
interchangeable
F14711Interchangeable
interchangeable cross-reference
interchangeable
M-558Interchangeable
interchangeable cross-reference
interchangeable
42751Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NW14711?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NW14711?
NW14711 is a STRAP,RETAINING.
What parts can replace NW14711?
There are 9 known substitutes for NW14711: 14711, 499737C1, Y028 787 03 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NW14711?
NW14711 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-247-0498. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NW14711

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026