PartsTable
Technical Data Sheet
Download PDF

NW14692 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NW14692: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.406 INCHES NOMINAL IN, fork_depth: 1.125 INCHES NOMINAL IN, hole_diameter: 0.500 INCHES NOMINAL IN, overall_width: 1.145 INCHES NOMINAL IN, shank_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-228-7289, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NW14692
NSN: 5340-00-228-7289
FSC: 5340 — Hardware, Commercial
CAGE: 44185 — TLD WOLLARD LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.406 INCHES NOMINAL IN
fork_depth1.125 INCHES NOMINAL IN
hole_diameter0.500 INCHES NOMINAL IN
overall_width1.145 INCHES NOMINAL IN
shank_diameter0.500 INCHES NOMINAL IN
fork_span_width0.540 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness0.305 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end5.000 INCHES NOMINAL IN
NSN5340-00-228-7289
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NW14692 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.500 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.540 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.305 INCHES NOMINAL IN
•
END RADIUS: 0.406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL: STEEL OVERALL
•
FORK DEPTH: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.500 INCHES NOMINAL IN
FORK SPAN WIDTH0.540 INCHES NOMINAL IN
FORK ARM THICKNESS0.305 INCHES NOMINAL IN
END RADIUS0.406 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH1.145 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
FORK DEPTH1.125 INCHES NOMINAL IN
HOLE DIAMETER0.500 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END5.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
14692Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NW14692?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NW14692?
NW14692 is a CLEVIS,ROD END.
What parts can replace NW14692?
There is 1 known substitute for NW14692: 14692. Substitute compatibility should be verified for your specific system.
What is the NSN for NW14692?
NW14692 is cataloged in the U.S. Government catalog under NSN 5340-00-228-7289. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NW14692