PartsTable
Technical Data Sheet
Download PDF

NV822201 FIND 90 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NV822201 FIND 90: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -35.0 CELSIUS AND 450.0 CELSIUS DEGC, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.614 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN, end_item_identification: GAS PROCESSING UNIT,ILPE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-513-4623, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NV822201 FIND 90
NSN: 5331-01-513-4623
FSC: 5331 — O-ring
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-35.0 CELSIUS AND 450.0 CELSIUS DEGC
hardness_rating90.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.614 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
end_item_identificationGAS PROCESSING UNIT,ILPE
material_document_and_classification(5F573) 937 EXPLOSIVE DECOMPRESSION COMPOUND MFR REF SINGLE MATERIAL RESPONSE
NSN5331-01-513-4623
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NV822201 FIND 90 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -35.0 CELSIUS AND 450.0 CELSIUS DEGC
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: (5F573) 937 EXPLOSIVE DECOMPRESSION COMPOUND MFR REF SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.614 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
TEMP RATING-35.0 CELSIUS AND 450.0 CELSIUS DEGC
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION(5F573) 937 EXPLOSIVE DECOMPRESSION COMPOUND MFR REF SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER0.614 INCHES NOMINAL IN
END ITEM IDENTIFICATIONGAS PROCESSING UNIT,ILPE
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 1
9016-926Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NV822201 FIND 90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NV822201 FIND 90?
NV822201 FIND 90 is a O-RING.
What parts can replace NV822201 FIND 90?
There is 1 known substitute for NV822201 FIND 90: 9016-926. Substitute compatibility should be verified for your specific system.
What is the NSN for NV822201 FIND 90?
NV822201 FIND 90 is cataloged in the U.S. Government catalog under NSN 5331-01-513-4623. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NV822201 FIND 90