PartsTable
Technical Data Sheet
Download PDF

NV1022980-40 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NV1022980-40: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, head_style: FLAT CHAMFER, head_height: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, thread_class: 3A A, chamfer_angle: 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM, head_diameter: 1.107 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-679-7024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NV1022980-40
NSN: 5305-01-679-7024
FSC: 5305 — Screws
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
head_styleFLAT CHAMFER
head_height0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_class3A A
chamfer_angle30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
head_diameter1.107 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
thread_length2.00 INCHES MINIMUM IN
fastener_length3.25 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.625 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN5305-01-679-7024
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NV1022980-40 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
FASTENER LENGTH: 3.25 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS2700,METHOD 1,TYPE 2 OR 8,CLASS 4 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 2.00 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731(UNS S66286) OR AMS5737(UNS S66286) COLD WORKED AND AGE HARDENED TO MEET FASTENER REQUIREMENTS OF FF-S-86 AND NAS1352 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.7500 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
HEAD HEIGHT0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
FASTENER LENGTH3.25 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS2700,METHOD 1,TYPE 2 OR 8,CLASS 4 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH2.00 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5731(UNS S66286) OR AMS5737(UNS S66286) COLD WORKED AND AGE HARDENED TO MEET FASTENER REQUIREMENTS OF FF-S-86 AND NAS1352 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.7500 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
S9515-A6-MMA-010 TBL 7-51-66Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
HQ613410314Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S9515-A6-MMA-010 FIG 7-45-66Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NV1022980-40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NV1022980-40?
NV1022980-40 is a SCREW,CAP,SOCKET HEAD.
What parts can replace NV1022980-40?
There are 3 known substitutes for NV1022980-40: S9515-A6-MMA-010 TBL 7-51-66, HQ613410314, S9515-A6-MMA-010 FIG 7-45-66. Substitute compatibility should be verified for your specific system.
What is the NSN for NV1022980-40?
NV1022980-40 is cataloged in the U.S. Government catalog under NSN 5305-01-679-7024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NV1022980-40

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.