PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NUT1/2-13UNC

NUT1/2-13UNC — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include nut_height: 0.750 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND, width_across_flats: 0.870 INCHES NOMINAL IN, nominal_thread_size: 0.250 INCHES IN, end_item_identification: (53711) RMV ASSY UNIT 21 AN/WLD-A (V). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-528-6130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NUT1/2-13UNC
NSN: 5310-01-528-6130
FSC: 5310
CAGE: 1LL51 — STRONGWELL CORPORATION (USA)
SPECIFICATIONS
nut_height0.750 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.870 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
end_item_identification(53711) RMV ASSY UNIT 21 AN/WLD-A (V)
thread_quantity_per_inch13
part_name_assigned_by_controlling_agencyFIBREBOLT NUT
NSN5310-01-528-6130
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NUT1/2-13UNC · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NUT HEIGHT: 0.750 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 13
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
WIDTH ACROSS FLATS: 0.870 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
PART NAME ASSIGNED BY CONTROLLING AGENCYFIBREBOLT NUT
NUT HEIGHT0.750 INCHES NOMINAL IN
THREAD QUANTITY PER INCH13
END ITEM IDENTIFICATION(53711) RMV ASSY UNIT 21 AN/WLD-A (V)
NOMINAL THREAD SIZE0.250 INCHES IN
WIDTH ACROSS FLATS0.870 INCHES NOMINAL IN
SPECIAL FEATURESFIBREBOLT STUDS AND NUTS SHOULD BE USED TOGETHER AS A SYSTEM TO ASSURE PROPER FIT AND PROPERTIES. FIBREBOLT STUDS ARE PULTRUDED,FIBERGLASS REINFORCED VINYL ESTER THREADED RODS AND THERMOPLASTIC HEX SHAPED NUTS. THE PROPERTIES AND CHARACTERISTICS DIFFER FR
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
B4013204-79Interchangeable
interchangeable cross-reference
interchangeable
6904020Interchangeable
interchangeable cross-reference
interchangeable
4000-0024Interchangeable
interchangeable cross-reference
interchangeable
9-470002Interchangeable
interchangeable cross-reference
interchangeable
470002Interchangeable
interchangeable cross-reference
interchangeable
368692Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NUT1/2-13UNC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NUT1/2-13UNC?
NUT1/2-13UNC is a NUT,PLAIN,HEXAGON.
What parts can replace NUT1/2-13UNC?
There are 9 known substitutes for NUT1/2-13UNC: B4013204-79, 6904020, 4000-0024 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NUT1/2-13UNC?
NUT1/2-13UNC is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-528-6130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NUT1/2-13UNC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026