PartsTable
Technical Data Sheet
Download PDF

NT886 — NUT,PLAIN,CAP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NT886: NUT,PLAIN,CAP.

The NUT,PLAIN,CAP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CAP, nut_height: 0.625 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-112-7922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NT886
NSN: 5310-01-112-7922
FSC: 5310 — Nuts and Washers
CAGE: 01843 — AMBAC INTERNATIONAL CORPORATION DIV AMBAC INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCAP
nut_height0.625 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
countersink_angle60.0 DEGREES NOMINAL NUT
surface_treatmentOXIDE OVERALL
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeWASHER FACED
counterbore_diameter0.270 INCHES NOMINAL NUT IN
NSN5310-01-112-7922
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NT886 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PS 1012,FSCM 01843 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION C
•
MATERIAL DOCUMENT AND CLASSIFICATION: PM 3-14,FSCM 01843 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NUT COUNTERBORE DEPTH: 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM NUT IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONPS 1012,FSCM 01843 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION C
MATERIAL DOCUMENT AND CLASSIFICATIONPM 3-14,FSCM 01843 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NUT COUNTERBORE DEPTH0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM NUT IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
COUNTERBORE DIAMETER0.270 INCHES NOMINAL NUT IN
NUT HEIGHT0.625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
7748699Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310011127922Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NT886?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NT886?
NT886 is a NUT,PLAIN,CAP.
What parts can replace NT886?
There are 2 known substitutes for NT886: 7748699, 5310011127922. Substitute compatibility should be verified for your specific system.
What is the NSN for NT886?
NT886 is cataloged in the U.S. Government catalog under NSN 5310-01-112-7922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NT886

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.