PartsTable
Technical Data Sheet
Download PDF

NT1217 — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

NT1217: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 0.7500 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN, material: LUBRICANT LUBRICATION, corner_shape: SQUARE ALL CORNERS, outside_diameter: 1.0590 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM IN, special_features: COLOR BLACK, style_designator: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-013-4052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NT1217
NSN: 3120-01-013-4052
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 71041 — ALTRA INDUSTRIAL MOTION CORP. (USA)
SPECIFICATIONS
diameter0.7500 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
materialLUBRICANT LUBRICATION
corner_shapeSQUARE ALL CORNERS
outside_diameter1.0590 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM IN
special_featuresCOLOR BLACK
style_designatorROUND
overall_thickness0.0910 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM IN
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN3120-01-013-4052
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: NT1217 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
OVERALL THICKNESS: 0.0910 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND
•
DIAMETER: 0.7500 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 1.0590 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
OVERALL THICKNESS0.0910 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM IN
STYLE DESIGNATORROUND
DIAMETER0.7500 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER1.0590 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR BLACK
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
MATERIALLUBRICANT LUBRICATION
CENTER HOLE SHAPE STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 1
D302911PC37Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NT1217?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NT1217?
NT1217 is a BEARING,WASHER,THRUST.
What parts can replace NT1217?
There is 1 known substitute for NT1217: D302911PC37. Substitute compatibility should be verified for your specific system.
What is the NSN for NT1217?
NT1217 is cataloged in the U.S. Government catalog under NSN 3120-01-013-4052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NT1217