PartsTable
Technical Data Sheet
Download PDF

NS2037PC8298 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NS2037PC8298: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.500 INCHES NOMINAL IN, overall_length: 8.125 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-147-3624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NS2037PC8298
NSN: 5330-00-147-3624
FSC: 5330 — Packing and Gasket Materials
CAGE: 55509 — COOPER CAMERON CORP AJAX-SUPERIOR DIV (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.500 INCHES NOMINAL IN
overall_length8.125 INCHES NOMINAL IN
bolt_hole_quantity2
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-00-147-3624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NS2037PC8298 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
•
MATERIAL: PAPER OVERALL
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL LENGTH8.125 INCHES NOMINAL IN
OVERALL WIDTH2.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
MATERIALPAPER OVERALL
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 3
H9505Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
H9605Reference document
Same NSN cross-reference
Reference document — Secondary reference
NS2042PC8298Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy NS2037PC8298?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NS2037PC8298?
NS2037PC8298 is a GASKET.
What parts can replace NS2037PC8298?
There are 3 known substitutes for NS2037PC8298: H9505, H9605, NS2042PC8298. Substitute compatibility should be verified for your specific system.
What is the NSN for NS2037PC8298?
NS2037PC8298 is cataloged in the U.S. Government catalog under NSN 5330-00-147-3624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NS2037PC8298