PartsTable
Technical Data Sheet
Download PDF

NS103494-126 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NS103494-126: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660, overall_width: 1.423 INCHES MINIMUM AND 1.453 INCHES MAXIMUM IN, overall_height: 0.405 INCHES MAXIMUM IN, overall_length: 2.327 INCHES MAXIMUM IN, style_designator: ANCHOR, surface_treatment: PASSIVATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-147-5025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NS103494-126
NSN: 5340-01-147-5025
FSC: 5340 — Hardware, Commercial
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
materialIRON ALLOY 660
overall_width1.423 INCHES MINIMUM AND 1.453 INCHES MAXIMUM IN
overall_height0.405 INCHES MAXIMUM IN
overall_length2.327 INCHES MAXIMUM IN
style_designatorANCHOR
surface_treatmentPASSIVATE
material_thickness0.067 INCHES MAXIMUM IN
mounting_hole_diameter0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
width_between_cup_flats0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
material_document_and_classificationAMS 5732, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers1.998 INCHES MINIMUM AND 2.002 INCHES MAXIMUM IN
center_to_center_distance_between_cup_and_mounting_hole0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
NSN5340-01-147-5025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NS103494-126 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.998 INCHES MINIMUM AND 2.002 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.067 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.405 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.998 INCHES MINIMUM AND 2.002 INCHES MAXIMUM IN
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
OVERALL LENGTH2.327 INCHES MAXIMUM IN
OVERALL WIDTH1.423 INCHES MINIMUM AND 1.453 INCHES MAXIMUM IN
MATERIAL THICKNESS0.067 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NS103494-126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NS103494-126?
NS103494-126 is a RETAINER,NUT AND BOLT.
What is the NSN for NS103494-126?
NS103494-126 is cataloged in the U.S. Government catalog under NSN 5340-01-147-5025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NS103494-126

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.