PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NR1-55K35
NR1-55K35 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.0938 INCHES NOMINAL IN, overall_width: 0.1094 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2463, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NR1-55K35
NSN: 3110-00-227-2463
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
bore_shapeSTRAIGHT
bore_diameter0.0938 INCHES NOMINAL IN
overall_width0.1094 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
special_featuresSELECTED,CLASSIFIED AND TESTED BY THE ASSY MFR AT HIS PLANT
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.3125 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.5
NSN3110-00-227-2463
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: NR1-55K35 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.0938 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: COPPER ALLOY OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.0938 INCHES NOMINAL IN
SPECIAL FEATURESSELECTED,CLASSIFIED AND TESTED BY THE ASSY MFR AT HIS PLANT
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALCOPPER ALLOY OVERALL
STANDARD TOLERANCE DESIGNATIONABEC NO.5
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER0.3125 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
OVERALL WIDTH0.1094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
17196Interchangeable
interchangeable cross-reference
interchangeable
3211688Interchangeable
interchangeable cross-reference
interchangeable
0913636-7Interchangeable
interchangeable cross-reference
interchangeable
33784SInterchangeable
interchangeable cross-reference
interchangeable
53A68A155Interchangeable
interchangeable cross-reference
interchangeable
RJ5050-25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NR1-55K35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NR1-55K35?
NR1-55K35 is a BEARING,BALL,ANNULAR.
What parts can replace NR1-55K35?
There are 20 known substitutes for NR1-55K35: 17196, 3211688, 0913636-7 and 17 more. Substitute compatibility should be verified for your specific system.
Is NR1-55K35 still available?
NR1-55K35 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NR1-55K35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026