NP417PC35 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

NP417PC35: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 9-1/2, inside_diameter: 0.387 INCHES NOMINAL IN, style_designator: CYLINDRICAL, surface_treatment: CADMIUM OVERALL, spring_free_length: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-620-1017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NP417PC35

NSN: 5360-00-620-1017
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 93591 — PENTAIR VALVES & CONTROLS US LP DIV FLOW CONTROL US HOLDING CORP (USA)

SPECIFICATIONS

end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity	9-1/2
inside_diameter	0.387 INCHES NOMINAL IN
style_designator	CYLINDRICAL
surface_treatment	CADMIUM OVERALL
spring_free_length	1.250 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_deflection_rate	16.000 POUNDS PER INCH NOMINAL LBS
spring_free_outside_diameter	0.487 INCHES NOMINAL IN
material_document_and_classification	JAN-S-1160,GRADE 2,TYPE B-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5360-00-620-1017

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.487 INCHES NOMINAL IN

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: JAN-S-1160,GRADE 2,TYPE B-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 1.250 INCHES NOMINAL IN

•

SPRING DEFLECTION RATE: 16.000 POUNDS PER INCH NOMINAL LBS

•

INSIDE DIAMETER: 0.387 INCHES NOMINAL IN

•

COIL QUANTITY: 9-1/2

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.487 INCHES NOMINAL IN
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	JAN-S-1160,GRADE 2,TYPE B-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	1.250 INCHES NOMINAL IN
SPRING DEFLECTION RATE	16.000 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER	0.387 INCHES NOMINAL IN
COIL QUANTITY	9-1/2
SURFACE TREATMENT	CADMIUM OVERALL
COIL HELIX DIRECTION	RIGHT-HAND OR LEFT-HAND

SUBSTITUTES & CROSS-REFERENCES 7

904A572PC1Reference document

Same NSN cross-reference

Reference document — Secondary reference

1JH4866PC44Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

904A572-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

S1073PC15Reference document

Same NSN cross-reference

Reference document — Secondary reference

905J985PC12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

NK135PC1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NP417PC35?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NP417PC35?

NP417PC35 is a SPRING,HELICAL,COMPRESSION.

What parts can replace NP417PC35?

There are 7 known substitutes for NP417PC35: 904A572PC1, 1JH4866PC44, 904A572-1 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for NP417PC35?

NP417PC35 is cataloged in the U.S. Government catalog under NSN 5360-00-620-1017. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NP417PC35 — SPRING,HELICAL,COMPRESSION

Request a Quote — NP417PC35