PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NP13226PC9
NP13226PC9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, housing_bore_diameter: 2.875 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-0461, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NP13226PC9
NSN: 5330-00-154-0461
FSC: 5330
CAGE: 55509 — COOPER CAMERON CORP AJAX-SUPERIOR DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
housing_bore_diameter2.875 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-0461
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NP13226PC9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 2.875 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
MATERIALSTEEL CASE
HOUSING BORE DIAMETER2.875 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
34270Interchangeable
interchangeable cross-reference
interchangeable
57-1158Interchangeable
interchangeable cross-reference
interchangeable
607-36Interchangeable
interchangeable cross-reference
interchangeable
OO-S-236Interchangeable
interchangeable cross-reference
interchangeable
34-288Interchangeable
interchangeable cross-reference
interchangeable
AT43743Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NP13226PC9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NP13226PC9?
NP13226PC9 is a SEAL,PLAIN ENCASED.
What parts can replace NP13226PC9?
There are 10 known substitutes for NP13226PC9: 34270, 57-1158, 607-36 and 7 more. Substitute compatibility should be verified for your specific system.
Is NP13226PC9 still available?
NP13226PC9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NP13226PC9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026