PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NP10004PCP57
NP10004PCP57 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 10.0 DEGREES NOMINAL, material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 5.125 INCHES NOMINAL IN, center_hole_diameter: 4.875 INCHES NOMINAL IN, cross-sectional_height: 0.188 INCHES NOMINAL IN, cross-sectional_shape_style: ANGLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-3844, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NP10004PCP57
NSN: 5330-00-291-3844
FSC: 5330
CAGE: 55509 — COOPER CAMERON CORP AJAX-SUPERIOR DIV (USA)
SPECIFICATIONS
angle10.0 DEGREES NOMINAL
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter5.125 INCHES NOMINAL IN
center_hole_diameter4.875 INCHES NOMINAL IN
cross-sectional_height0.188 INCHES NOMINAL IN
cross-sectional_shape_styleANGLE
NSN5330-00-291-3844
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NP10004PCP57 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 4.875 INCHES NOMINAL IN
•
ANGLE: 10.0 DEGREES NOMINAL
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
PERIPHERAL DIAMETER: 5.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER4.875 INCHES NOMINAL IN
ANGLE10.0 DEGREES NOMINAL
CROSS-SECTIONAL SHAPE STYLEANGLE
PERIPHERAL DIAMETER5.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
P57Interchangeable
interchangeable cross-reference
interchangeable
154485Interchangeable
interchangeable cross-reference
interchangeable
695217Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NP10004PCP57?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NP10004PCP57?
NP10004PCP57 is a PACKING,PREFORMED.
What parts can replace NP10004PCP57?
There are 3 known substitutes for NP10004PCP57: P57, 154485, 695217. Substitute compatibility should be verified for your specific system.
Is NP10004PCP57 still available?
NP10004PCP57 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NP10004PCP57

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026