PartsTable
Technical Data Sheet
Download PDF

NP-622 PC 12 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NP-622 PC 12: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: HEXAGON, nut_height: 0.301 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-467-3061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NP-622 PC 12
NSN: 5310-01-467-3061
FSC: 5310 — Nuts and Washers
CAGE: 93591 — PENTAIR VALVES & CONTROLS US LP DIV FLOW CONTROL US HOLDING CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleHEXAGON
nut_height0.301 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.861 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
nominal_thread_size0.562 INCHES IN
bearing_surface_typeCHAMFERED OR FLAT
thread_pitch_diameters+0.5264 TO 0.5323 INCHES IN
end_item_identificationNIMITZ CLASS CVN
thread_quantity_per_inch8
NSN5310-01-467-3061
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NP-622 PC 12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.861 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD PITCH DIAMETERS: +0.5264 TO 0.5323 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A563 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
NUT HEIGHT: 0.301 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.861 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD PITCH DIAMETERS+0.5264 TO 0.5323 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A563 ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.562 INCHES IN
NUT HEIGHT0.301 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATIONNIMITZ CLASS CVN
SUBSTITUTES & CROSS-REFERENCES 4
KN3881-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
NK3881-6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
NP-623 PC 12Reference document
Same NSN cross-reference
Reference document — Secondary reference
NP-623Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NP-622 PC 12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NP-622 PC 12?
NP-622 PC 12 is a NUT,PLAIN,HEXAGON.
What parts can replace NP-622 PC 12?
There are 4 known substitutes for NP-622 PC 12: KN3881-6, NK3881-6, NP-623 PC 12 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NP-622 PC 12?
NP-622 PC 12 is cataloged in the U.S. Government catalog under NSN 5310-01-467-3061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NP-622 PC 12