PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NO.8 NOM DIA, C RES 316
NO.8 NOM DIA, C RES 316 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NO.8 NOM DIA, C RES 316 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-389-6984, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NO.8 NOM DIA, C RES 316
NSN: 5310-01-389-6984
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberNO.8 NOM DIA, C RES 316
NSN5310-01-389-6984
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NO.8 NOM DIA, C RES 316 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 316 OVERALL
•
OUTSIDE DIAMETER: 0.296 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 316 OVERALL
OUTSIDE DIAMETER0.296 INCHES MAXIMUM IN
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
ASME B18.2.1Interchangeable
interchangeable cross-reference
interchangeable
18257-001Interchangeable
interchangeable cross-reference
interchangeable
D305308 FIND NO 107Interchangeable
interchangeable cross-reference
interchangeable
503B1-36Interchangeable
interchangeable cross-reference
interchangeable
1307320PC48Interchangeable
interchangeable cross-reference
interchangeable
236-1150P4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NO.8 NOM DIA, C RES 316?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NO.8 NOM DIA, C RES 316?
NO.8 NOM DIA, C RES 316 is a NO.8 NOM DIA, C RES 316.
What parts can replace NO.8 NOM DIA, C RES 316?
There are 18 known substitutes for NO.8 NOM DIA, C RES 316: ASME B18.2.1, 18257-001, D305308 FIND NO 107 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NO.8 NOM DIA, C RES 316?
NO.8 NOM DIA, C RES 316 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-389-6984. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NO.8 NOM DIA, C RES 316

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026