PartsTable
Technical Data Sheet
Download PDF

NMP-125 PIECE 17A — RETAINER,DISK,VALVE

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

NMP-125 PIECE 17A: RETAINER,DISK,VALVE.

The RETAINER,DISK,VALVE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, overall_length: 0.375 INCHES NOMINAL IN, inside_diameter: 0.344 INCHES NOMINAL IN, special_features: HEX HEAD 0.562 IN. ACROSS FLATS; BOTTOM THREADED 17/32-18 THREADED IN, material_document_and_classification: QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE.

This part is cataloged in the U.S. Government catalog under NSN 4820-01-241-4237, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NMP-125 PIECE 17A
NSN: 4820-01-241-4237
FSC: 4820 — Valves, Nonpowered
CAGE: 75954 — KUNKLE INDUSTRIES INC LONERGAN VALVE DIV (USA)
SPECIFICATIONS
materialNICKEL ALLOY
overall_length0.375 INCHES NOMINAL IN
inside_diameter0.344 INCHES NOMINAL IN
special_featuresHEX HEAD 0.562 IN. ACROSS FLATS; BOTTOM THREADED 17/32-18 THREADED IN
material_document_and_classificationQQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE
NSN4820-01-241-4237
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: NMP-125 PIECE 17A · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE
•
INSIDE DIAMETER: 0.344 INCHES NOMINAL IN
•
MATERIAL: NICKEL ALLOY
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH0.375 INCHES NOMINAL IN
INSIDE DIAMETER0.344 INCHES NOMINAL IN
SPECIAL FEATURESHEX HEAD 0.562 IN. ACROSS FLATS; BOTTOM THREADED 17/32-18 THREADED IN
MATERIALNICKEL ALLOY
SUBSTITUTES & CROSS-REFERENCES 3
045-500-0032Reference document
Same NSN cross-reference
Reference document — Secondary reference
NMP-125Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
S4824H3237425 PIECE 17ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NMP-125 PIECE 17A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NMP-125 PIECE 17A?
NMP-125 PIECE 17A is a RETAINER,DISK,VALVE.
What parts can replace NMP-125 PIECE 17A?
There are 3 known substitutes for NMP-125 PIECE 17A: 045-500-0032, NMP-125, S4824H3237425 PIECE 17A. Substitute compatibility should be verified for your specific system.
What is the NSN for NMP-125 PIECE 17A?
NMP-125 PIECE 17A is cataloged in the U.S. Government catalog under NSN 4820-01-241-4237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NMP-125 PIECE 17A