PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NMP-1106PC9
NMP-1106PC9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER OVERALL, outside_diameter: 1.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.781 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-529-6350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NMP-1106PC9
NSN: 5330-01-529-6350
FSC: 5330
CAGE: 15187 — EMERSON AUTOMATION SOLUTIONS FINAL CONTROL US LP DIV NAVY PRODUCT TEAM (USA)
SPECIFICATIONS
materialCOPPER OVERALL
outside_diameter1.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.781 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-01-529-6350
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NMP-1106PC9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.781 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
APERTURE DIAMETER0.781 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
043-106-0016Interchangeable
interchangeable cross-reference
interchangeable
ASTMB194-C17200-TD01-0.032X6X48Interchangeable
interchangeable cross-reference
interchangeable
7149BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NMP-1106PC9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NMP-1106PC9?
NMP-1106PC9 is a GASKET.
What parts can replace NMP-1106PC9?
There are 3 known substitutes for NMP-1106PC9: 043-106-0016, ASTMB194-C17200-TD01-0.032X6X48, 7149B. Substitute compatibility should be verified for your specific system.
What is the NSN for NMP-1106PC9?
NMP-1106PC9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-529-6350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NMP-1106PC9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026