PartsTable
Technical Data Sheet
Download PDF

NMCSB8000UGM514T — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NMCSB8000UGM514T: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include diameter: 44.4 MILLIMETERS NOMINAL MM, material: STEEL COMP 303 INSERT, flange_diameter: 31.75 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND RIGHT INTERNAL, surface_treatment: CADMIUM INSERT, nominal_thread_size: 5.0 MILLIMETERS RIGHT INTERNAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-566-7104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NMCSB8000UGM514T
NSN: 5340-01-566-7104
FSC: 5340 — Hardware, Commercial
CAGE: 03296 — NMC GROUP, INC. (USA)
SPECIFICATIONS
diameter44.4 MILLIMETERS NOMINAL MM
materialSTEEL COMP 303 INSERT
flange_diameter31.75 MILLIMETERS NOMINAL MM
thread_directionRIGHT-HAND RIGHT INTERNAL
surface_treatmentCADMIUM INSERT
nominal_thread_size5.0 MILLIMETERS RIGHT INTERNAL MM
cross-sectional_shapeROUND
thread_tolerance_class4H6H INTERNAL RIGHT INTERNAL
thread_series_designatorISO M RIGHT INTERNAL
thread_pitch_in_millimeters0.8 RIGHT INTERNAL
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE INSERT
surface_treatment_document_and_classificationQQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INSERT
NSN5340-01-566-7104
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NMCSB8000UGM514T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 31.75 MILLIMETERS NOMINAL MM
•
THREAD TOLERANCE CLASS: 4H6H INTERNAL RIGHT INTERNAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INSERT
•
THREAD PITCH IN MILLIMETERS: 0.8 RIGHT INTERNAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE INSERT
•
DIAMETER: 44.4 MILLIMETERS NOMINAL MM
•
THREAD DIRECTION: RIGHT-HAND RIGHT INTERNAL
•
NOMINAL THREAD SIZE: 5.0 MILLIMETERS RIGHT INTERNAL MM
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER31.75 MILLIMETERS NOMINAL MM
THREAD TOLERANCE CLASS4H6H INTERNAL RIGHT INTERNAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INSERT
THREAD PITCH IN MILLIMETERS0.8 RIGHT INTERNAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE INSERT
DIAMETER44.4 MILLIMETERS NOMINAL MM
THREAD DIRECTIONRIGHT-HAND RIGHT INTERNAL
NOMINAL THREAD SIZE5.0 MILLIMETERS RIGHT INTERNAL MM
CROSS-SECTIONAL SHAPEROUND
SURFACE TREATMENTCADMIUM INSERT
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy NMCSB8000UGM514T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NMCSB8000UGM514T?
NMCSB8000UGM514T is a STANDOFF,THREADED,SPACING.
What is the NSN for NMCSB8000UGM514T?
NMCSB8000UGM514T is cataloged in the U.S. Government catalog under NSN 5340-01-566-7104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NMCSB8000UGM514T

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.