NMC3625-2 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

NMC3625-2: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-193-4571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NMC3625-2

NSN: 5340-01-193-4571
FSC: 5340 — Hardware, Commercial
CAGE: 03296 — NMC GROUP, INC. (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
material	PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
overall_width	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
loop_inside_diameter	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
material_document_and_classification	103 FSCM 31708 MFR REF SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end	0.707 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.437 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
NSN	5340-01-193-4571

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: 103 FSCM 31708 MFR REF SINGLE MATERIAL RESPONSE OVERALL

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.707 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.437 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	103 FSCM 31708 MFR REF SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.199 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
OVERALL WIDTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.707 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.437 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
MATERIAL	PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
LOOP INSIDE DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

OP633-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy NMC3625-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NMC3625-2?

NMC3625-2 is a CLAMP,LOOP.

What parts can replace NMC3625-2?

There is 1 known substitute for NMC3625-2: OP633-2. Substitute compatibility should be verified for your specific system.

What is the NSN for NMC3625-2?

NMC3625-2 is cataloged in the U.S. Government catalog under NSN 5340-01-193-4571. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NMC3625-2 — CLAMP,LOOP

Request a Quote — NMC3625-2