PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NLT100PC50
NLT100PC50 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.7250 INCHES NOMINAL IN, cone_width: 0.7710 INCHES NOMINAL IN, bore_diameter: 1.3750 INCHES NOMINAL IN, overall_width: 0.8813 INCHES NOMINAL IN, standout_width: 0.1563 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NLT100PC50
NSN: 3110-00-100-6005
FSC: 3110
CAGE: 73041 — HOLIDAY-HAMMOND CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.7250 INCHES NOMINAL IN
cone_width0.7710 INCHES NOMINAL IN
bore_diameter1.3750 INCHES NOMINAL IN
overall_width0.8813 INCHES NOMINAL IN
standout_width0.1563 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0620 INCHES NOMINAL IN
backface_corner_radius0.0930 INCHES NOMINAL IN
overall_outside_diameter2.8380 INCHES NOMINAL IN
nondefinitive_spec/std_data751 TYPE
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-6005
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: NLT100PC50 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 751 TYPE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OVERALL OUTSIDE DIAMETER: 2.8380 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
CUP WIDTH: 0.7250 INCHES NOMINAL IN
•
CONE WIDTH: 0.7710 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATA751 TYPE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL OUTSIDE DIAMETER2.8380 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
CUP WIDTH0.7250 INCHES NOMINAL IN
CONE WIDTH0.7710 INCHES NOMINAL IN
STANDOUT WIDTH0.1563 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0930 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
T71Interchangeable
interchangeable cross-reference
interchangeable
33269Interchangeable
interchangeable cross-reference
interchangeable
TP531Interchangeable
interchangeable cross-reference
interchangeable
33269-1Interchangeable
interchangeable cross-reference
interchangeable
400-032Interchangeable
interchangeable cross-reference
interchangeable
T72Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NLT100PC50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NLT100PC50?
NLT100PC50 is a BEARING,ROLLER,TAPERED.
What parts can replace NLT100PC50?
There are 15 known substitutes for NLT100PC50: T71, 33269, TP531 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NLT100PC50?
NLT100PC50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NLT100PC50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026