PartsTable
Technical Data Sheet
Download PDF

NKS24694S104 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NKS24694S104: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OR STEEL COMP 8630 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN, screw_material: STEEL COMP 8630 OR STEEL COMP 4037. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-964-2844, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NKS24694S104
NSN: 5305-00-964-2844
NIINs: 009642844, 010228074
FSC: 5305 — Screws
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OR STEEL COMP 8630 OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.500 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
screw_materialSTEEL COMP 8630 OR STEEL COMP 4037
fastener_length1.078 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
locking_featurePELLET THREADS
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-00-964-2844
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NKS24694S104 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 1.078 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.429 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH1.078 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
THREAD LENGTH0.429 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 8630 OR STEEL COMP 4037
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 5
5305009642844Reference document
Same NSN cross-reference
Reference document — Secondary reference
NAS334CF10-5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-S-7839Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS24694S104Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN509-416R17Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NKS24694S104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NKS24694S104?
NKS24694S104 is a SCREW,CAP,SOCKET HEAD.
What parts can replace NKS24694S104?
There are 5 known substitutes for NKS24694S104: 5305009642844, NAS334CF10-5, MIL-S-7839 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NKS24694S104?
NKS24694S104 is cataloged in the U.S. Government catalog under NSN 5305-00-964-2844. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NKS24694S104

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.