PartsTable
Technical Data Sheet
Download PDF

NK507-640-6F — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NK507-640-6F: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.284 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, fastener_length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-550-3339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NK507-640-6F
NSN: 5305-00-550-3339
FSC: 5305 — Screws
CAGE: 26233 — NYLOK LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OVERALL
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.284 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
fastener_length0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
locking_featurePATCH OR STRIP THREADS
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentCADMIUM OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
NSN5305-00-550-3339
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NK507-640-6F · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.284 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: PATCH OR STRIP THREADS
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
THREAD LENGTH0.284 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPATCH OR STRIP THREADS
SURFACE TREATMENTCADMIUM OVERALL
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy NK507-640-6F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NK507-640-6F?
NK507-640-6F is a SCREW,CAP,SOCKET HEAD.
What is the NSN for NK507-640-6F?
NK507-640-6F is cataloged in the U.S. Government catalog under NSN 5305-00-550-3339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NK507-640-6F